...
Sorry out of stock
This Meteor cylinder kit will work on the
Husqvarna 281 and the 288 54 mm bore.
This kit is as good as OEM
The piston rings are made of steel with the right properties to give a good seal and are long lasting.
The pistons are cast from a 18% sylicon aluminium alloy and are heat treated and CNC machined for a prfect fit.
The cylinder is coated with nickel silicon carbides, which gives a longer service life.
AS always I only sell what I would use in my saws which I use to cut wood to heat my house with.
If you encounter any problems along the way, I am here to help you through it.
This 288 cylinder kit for the Husqvarna 288 or 281 includes 54mm cylinder kit, wrist pin bearing
,base gasket, carb gaskets and exhaust gasket.
I also include a work shop manual via email.
To avoid this happening again, use fresh premium gas which is less than 60 days old. Use an oil mix rated FD and a gas can
with a tight seal.
This will insure the least amount of water dissolved in the gas and the most lubrication possible.
I will also send this work shop manual so you can do this right.
